TCN-11 Thermal Clip-on

TSA-7 High-performance thermal sight

TSA-7 High-performance thermal sight

The latest development high-performance thermal imaging sight designed for long range engagements. Ideal to be used on various types of weapons, mainly with sniper rifles and heavy machine guns.
Key advantages of TSA-7 are Automatic Crosshair Adjustment based on data obtained from the Internal Ballistic Computer, all packed in shockproof and waterproof housing.

Features
  • Capable of adjusting the crosshair based on atmospheric conditions, wind (any direction and max speed 10m/s), derivation, angle of sight and the Coriolis force
  • Temperature of powder charge and susceptibility factor of used ammunition and ambient temperature
  • Automatic adjustment of conditions for a specific cartridge and firing corrections using obtained data
  • Drag compensations, using G1 or G7 drag ballistic standard (based on Lapua Radar Data or generated by external ballistic programs)
  • Laser rangefinder tuned to 1550nm wavelength, integrated in thermal sight allowing to accurately measure distance to the target as far as 2500m
TGX-8 Hand-held thermal binocular

TGX-8 Hand-held thermal binocular

Thermal imaging binocular TGX-8 is an ultramodern compact optical device, designed for monitoring and observing areas in limited visibility conditions – poor light, smoke, fog, obscured objects (by vegetation or merged with underlying terrain).
Distinctive feature of TGX-8 binocular is an integrated compact laser rangefinder tuned to 1550nm wavelength allowing to accurately measure to the target as far as 2500m.

Features
  • 2x, 3x, 4x digital zoom.
  • Sensitivity settings of the detector.
  • Different color schemes for the image refinement.
  • Integrated laser rangefinder.
  • Built-in compass and accelerometer.
  • Built-in video module.
  • Manual and automatic calibration of the detector.
TMQ-X Helmet mounted thermal monocular

TMQ-X Helmet mounted thermal monocular

The TMQ-X series is a digital ultra-compact thermal imaging device. Small dimensions of this series allow comfortable use of the monocular, mounted on a headgear or helmet, ideal for use by special units in urban conditions and in close quarter engagements and other situations requiring both hands.

Features
  • USB interface for programming and device control.
  • 2x, 4x digital zoom.
  • Sensitivity settings of the detector.
  • Different color schemes for the image refinement.
  • Manual calibration of the detector.
  • Option to connect an external power supply.
  • Analog video output with a possibility of switching off.
NVGA-X Helmet mounted night vision

NVGA-X Helmet mounted night vision

The NVGA-X series of night vision goggles is represented by: NVGA-7 compact, rugged, single channel, bi-ocular night vision NVGA-15 compact, rugged, dual-channel, bi-ocular night vision These goggles are perfect hands-free units that meet a wide array of specialized requirements – built in a tough and ergonomic composite housing with the highest grade optics and simple, reliable, electronics.

Features
  • Built-in Class 1 covert IR laser pointer
  • Redundant dual-tube design
  • True stereoscopic vision
  • Lightweight & compact rugged goggle system
  • Head or helmet mountable for hands-free operation
  • Automatic brightness control
  • Bright light cut-off
  • Ergonomic, simple, easy to operate controls
  • Built-in Infrared illuminator and flood lens
  • Weather Resistant
  • Adaptable for use with cameras
NVSA-X Night vision sight

NVSA-X Night vision sight

The NVSA-X series of night vision sights represents the apex of night vision technology, specially designed to be used with rifles and machine guns.
Maintaining all operational advantages of our other night vision devices, the NVSA-X series brings additional features – wireless remote control, an automatic brightness control system, illuminated centered crosshair for optimal contrast, ability to be mounted to standard rail systems, etc.

Features
  • 2,5x; 4,5x or 6x magnification
  • Shock protected, all-glass IR transmission multi-coated optics
  • Bright light cut-off
  • Illuminated reticle with brightness adjustment
  • Wireless remote control included
  • Detachable long-range infrared illuminator
  • Waterproof design
  • Quick release mount
  • Mounts to standard rails
KAZHAN Complex

KAZHAN Complex

KAZHAN series are multispectral optoelectronic devices for use as a part of surveillance, reconnaissance and fire control systems.
Depending on the model type, KAZHAN devices are used in stationary look-out stations; as a part of autonomous combat modules; on armored vehicles; as a part of shipboard surveillance and fire control systems.
KAZHAN has several detection channels (1 -3) in different spectral bands (visible, SWIR, MWIR, LWIR) and a rangefinder channel.
Digital processing unit of KAZHAN series provides:

  • Primary and secondary digital image processing;
  • Automatic target detection;
  • Target tracking;
  • Raw data recording;
  • Data transfer to central observation post in digital and analog form.
Features
Technical characteristics

THERMAL IMAGING CHANNEL T1 T2 T3
Type of camera uncooled
Detector 640 x 512 17µ 8-14µ
Sensitivity <30mK
Focal length 150 mm 25 to 225mm 100  mm
Objective F number F/1.0 F/1.5 F/1.0
Angular field of view (H x 1/) 6.2° X 5.0° 25° X 20° to 2.7° X 2.2° 6.2° X 5.0°
Recognition / ldentificatlon  (human) 4.2 /  1.5 km 6.5 / 2.0 km 2.8/0.7 km
Recognition / Identification (vehicle) 10.0 / 3.6 km 16.0 / 5.0 km 8.0/2.3 km

 

DAYTIME CHANNEL C1
Type of camera CMOS
Detector 1/ 4″ CMOS 1280 x 1024 60fps
Lens focal length 3.5    150.5 mm
Angular field of view (wide) H : 45.92° x V : 38.2°
Angular field of view (narrow) H : 2.7° x V : 1.8°
Sensitivity chromatic image: 0.5 Lux/F1.4,
monochromatic image: 0.05 Lux/F1.4

 

PROTECTION
IP class IP67, ice protection
Operating temperature range -30°C to +55°C
SYCH-X Complex

SYCH-X Complex

The SYCH-X complex is a multifunctional optoelectronic device designed for 24/7 video monitoring of the terrain, aims searching and automatic detection of camouflaged optical aiming and tracking devices, determination of t heir coordinates and distance in difficult terrain and urban buildings conditions.

Providing an early and prompt detection of optical aiming devices and the fact of covert objects surveillance, the complex prevents a sniper attack or terrorist act at the stage of their preparation

The SYCH operates in two modes:

  • Passive mode. Exploration of territories and the surrounding environment with the help of television and thermal imaging modules in order to find and detect targets, measure the distance to them and determine the coordinates.
  • Active mode. Lase r scanning of designated areas in order to search and automatically detect camouflaged optical aiming and tracking devices, measure the distance to them and determine the coordinates.
Features

Technical characteristics

THERMAL IMAGING MODULE
Thermal sensor type Uncooled microbolometer
Thermal sensor resolution 640 X 512
Objective 100mm
Objective F number F/1.0
Field of view 6.2° X 4.9°
Dimensions (Ø x L) Ø 115 x 250 mm
Weight 3.3 kg
Detection range (man/vehicle) 2500 m / 6000 m

 

OPTOELECTRONIC UNIT
Television Module
Video sensor type CMOS
Video sensor resolution 1280 X 720
Wide field of view (H x V) 63.7° X 47.9°
Narrow field of view (H x V) 2.3° x 1.7°
Illumination operating range 0.001…100000 Im
Detection range (man/Vehicle) 3000 m / 9000 m
Laser Module
Laser field (H x V) 0.1° X 1.7°
Spectral range of laser emitters Infrared / Visible
Detection range of optical devices up to 2000m
Laser Rangefinder
Wavelength 1550nm
Radiation divergence 1 x 1 mrad
Measurement range 25 … 6000 m
Distance error ±1 m
CANTIS-X

CANTIS-X

The system CANTIS-X is a multi-spectral modular-type optoelectronic device intended for use as a part of modern surveillance & reconnaissance systems and can be easily integrated with them.

The CANTIS-X can be used as:

  • self-contained device with the use of a portable control panel RMC-03;
  • part of automated surveillance system cooperating with other systems (radars, seismic detectors, etc.).

CANTIS-X module consists of:

  • thermal imaging camera (cooled or uncooled core);
  • day camera;
  • MST-2 pan and tilt positioner;
  • optionally extended by laser rangefinder.
Features
Thermal imaging camera
Core type Cooled, InSb or MTC, 640×512 pixels
Wave length 3,0 up to 5,0 µm
Sensitivity ˂25 mK
Image Processing Histogram, Digital detail high-lighting
Video system PAL (opt. Camera Link)
Video signal 1.0V p-p from 75 ohm
Field of View (W x N) 17,2°x 0,9° (horizontal)
Interface RS422
Voltage supply 24V DC
Consumption 12W (typical) / 14W (max)
Temperature from -32°C to +55°C (operational)
Protection IP65

 

Optical camera
Dynamic scene highlighting function, time shift option (stopping and replay of an image), including an option of a regressive image editing (zoom, etc.), movement detection, OSD, image stabilization, autofocus
Imaging Device 1/2.8 inches CMOS
Resolution 1920х1080  (2.07 M pixels)
Output video signal MIPI CSI-2
Optical zoom 35X
Field of view (W x H) (V)20,10° X 0,59° ±5%,
(H) 26,70° X 0,79° ±5%
Voltage supply 24V DC (max 36V DC)
Consumption 12W (typical)
Temperature from -32°C to + 55°C
Protection IP 65

 

Laser-rangefinder
Measuring distance to 22 000m
Range performance on beam filling target (reflectivity 60%, Observer visibility 50km, typical)
Accuracy ±1 m (typical) to ±2 m (worst case)
Refresh rate 1 Hz (full range of camera)
5 Hz (appx. 85% of full range)
10 Hz (appx. 79% of full range)
Interface RS 232, RS422
Safety class Class 1 (LRF Eye Safety per IEC 60825-1)
Class 3B (Pointer Eye Safety per IEC 60825-1)
Voltage 5V; 8 – 42V
Consumption 1W
Temperature -35°C to +55°C (operational)
Protection IP65
Hybrid Awareness System

Hybrid Awareness System

The system is intended to improve the situation awareness of vehicles’ crew. The system consists of a hybrid-cameras (daytime and thermal imaging channels) installed on a vehicle.
Foccused mainly on improvement of:

  • Drivers ability to maneuver in conditions of limited visibility (darkness, smoke, fog)
  • In addition to provide enhanced awearness of the surrounding environment.

Driving camera in the front – 0 degree from the angle of the direction / movement view for driver or commander;

Additional cameras – additional connected cameras to enhance awearness and control (rear and / or side view cameras).

Protective case of the cameras consists of sealed and impact resistant capsules ensuring the operation of devices in hars conditions at temperatures from -40 to +60.

Features

Technical characteristics

Basic parameters and characteristics of the thermal imaging module
Lens Athermal
Focal Distance 6.2 mm
F Number F/1.0
The field of view on the horizon is not less than 62,7 °
Field of view vertically, not less than 46,1 °
Detector technology Vox   384х288, 17 mkm
Detector sensitivity, no more than 0 K 0,03
Image refresh rate 30
Detection distance, m 300± 15%
Recognition distance, m 75± 15%
Identification distance, m 40± 15%
Focusing range 8 m ÷ ∞
Basic parameters and characteristics of the TV module
FOV (horizontal) 86°
FOV (vertical) 65°
Minimum Illumination, LUX: Color / BW 0,001/0,0001
Possibility of remote control of the sensor operating modes yes
General specifications
Output signal, CVBS PAL,NTSC
Signal control RS485
Additional graphic information for the driver dimensions and safe distances markings of the vehicle (adjustable)Indicators of vehicle critical heels
Camera cleaning system in difficult weather conditions mechanical cleanerintegrated anti-icing system
System of mechanical protection of lenses of the camera, if the system is not used metal blinds
Overall dimensions L * W * H 207*170*88
Housing protection class IP67
Operating temperature range -40С° + 60С°

A compact pre-lens thermal imaging clip-on  intended for use with daylight optical sights and enables their use in limited visibility conditions.
It does not interfere with installed day sight which is already installed on a rifle, does not break the adjustment of the optical sight.

Features
  • Electronic level and angle of sight sensor.
  • Built-in photo- and video module.
  • USB interface for programming and device control.
  • 1 x optical zoom; 2x, 3x, 4x digital zoom.
  • Different color schemes for the image refinement.
  • Operative adjustment of sensitive sensor parameters with the help of preset modes.
  • Ambient light sensor for automatic adjustment of display brightness.
  • Manual and automatic calibration of the detector.