Airport radars and ATM

Primary surveillance radar

Primary surveillance radar

Fully solid state radar system intended for detection of aircraft and other objects within the airspace.

Main characteristics:

    • Modular structure enabling modification to customer requirements
    • Compliance with ICAO standards
    • Compliance with Eurocontrol standards
    • Low operation and maintenance costs
Features

MAIN TECHNICAL PARAMETERS

Range

Elevation pattern

Accuracy (RMS) in range

Accuracy (RMS in azimuth)

Resolution

Resolution in range

Resolution in azimuth

Detection probability

Data update rate

Maximum number of simultaneously processed targets

Frequency band

Antenna type

Antenna beamwidth in azimuth

Gain (lower/upper beam)

Polarisation

0.5 – 65/80 NM

0 – 45°

75 m

0 – 0.1°

230 m

0 – 2.6°

80 % (@ RCS = 2 m2; PFA = 10-6)

4 – 10 s

1

2,700 – 2,900 MHz

1.3°

34 dBi/32.5 dBi

linear/circular polarisation

ADS-B

ADS-B

The ADS-B system is used as a supplementary data source for commonly used secondary radars or multilateration systems. Its function is based on airborne equipment which uses GPS for the determination of its own position, and subsequently automatically transmits position coordinates and other data to the control centre.

Features

Main characteristics:

  • Invaluable aid for aircraft navigation in wide areas without radar coverage (vast non-settled areas, seas and oceans)
  • Provides backing up radar data in case of failure or planned maintenance of the radar equipment
  • Broadcasting the messages that include GPS based position of the aircraft
Precision approach radar

Precision approach radar

The RP-6PA precision approach radar is equipped with the latest technologies. The radar provides comprehensive information necessary for precise control of all types of aircraft for landing – the information about accurate aircraft position, and current deviation from the required descent path in azimuth and elevation.

Features

Main characteristics:

  • Fully solid state technology
  • Antenna system with electronic scanning
  • Doubled configuration architecture
  • Modern radar data display software
  • The system has been designed and developed using state-of-the-art technologies
  • Modular design enabling modifications according to specific customer wishes
MAIN TECHNICAL PARAMETERS
Range 0 to 15 NM
Elevation pattern -1° to +7°
Azimuth pattern -10° to +10°
Accuracy (RMS) in range 30 m +3% of the distance from the touchdown point
Accuracy (RMS) in azimuth 0.6% of the distance of the aircraft from the antenna +10% of aircraft deviation from the course line, or 9 m (whichever of them is greater)
Accuracy (RMS) in elevation 0.4 % of the distance of the aircraft from the antenna +10% of aircraft linear deviation from selected glide slope, or 6 m (whichever of them is greater)
Resolution in range 60 m
Resolution in azimuth 0 to 1.2°
Resolution in elevation 0 to 0.6°
Detection probability > 90 % (@ RCS = 2 m2; PFA = 10-6)
Data update rate 1 sec
Maximum number of simultaneously processed targets 100
Frequency range 9100 – 9300 MHz
Antenna type 2× phased array antenna
Beam width (az/el) 1.2°/0.6°
Gain (az/el) 33 dBi/33 dBi
Polarizace vertical/horizontal/circular
Monopulse secondary surveillance radar

Monopulse secondary surveillance radar

A system for detection and display of the air situation based on the principle of interrogation and evaluation of received replies from cooperating airborne transponders. The system can be used as a stand-alone or can be easily integrated with the RL-71S primary surveillance radar and an ADS-B system.

Features

Main characteristics:

  • Compliance with ICAO standards
  • Compliance with Eurocontrol standards
  • Mode A, C and S (up to level 5) according to ICAO
  • Compliance with IFF modes 1, 2 and 3, NATO STANAG
  • Basic and extended surveillance mode S
  • Dual redundant solution, fully automated switching over
  • BITE for continuous monitoring of all sub-systems
  • Standard ASTERIX data interface
  • CMS graphic system for local and remote control and monitoring
  • Designed for unattended operation and easy maintenance
  • Possibility of remote-controlled mode S monitoring
MAIN TECHNICAL PARAMETERS
Operating modes 1, 2, 3/A, C and S (up to level 5, ELS/EHS)
Range up to 256 NM
Elevation pattern 0 – 45°
Accuracy in range 60 m
Accuracy in azimuth 0 – 0.1°
Resolution in range 230 m
Resolution in azimuth 0 – 0.1°
Detection probability > 98 %
Data update rate 4 – 10 s
Maximum number of processed targets 1
False target detection probability < 0.%
Frequency range 1030 – 1090 MHz
Antenna type LVA
Antenna beam width in azimuth 2.4°
Gain 27 dBi
3D radar

3D radar

Deployable modular system with flexible open architecture and fully solid-state software-defined multirole air surveillance 3D radar system. The equipment is provided in uniform and rugged design for installation into standard 19” rack.
The radar set consist of two deployable units. Both units are built on standardised ISO 1C platform.

Features
PARAMETER UNIT VALUE NOTE
Instrumental range
3D PSR NM up to 100
MSSR/IFF NM up to 256
Detection range
3D PSR NM up to 80 @ RCS = 1 m2
MSSR/IFF NM up to 150
Detection probability
3D PSR ≥ 0.8 @ RCS = 1 m2
MSSR/IFF ≥ 0.98
MSSR/IFF Interrogation modes 1,2,3/A,C,
  S up to level 5
Data refresh rate sec 4 to 10
Azimuth coverage ° 360
Elevation coverage
3D PSR ° 0 to 30
MSSR/IFF ° 0 to 45
Range accuracy (mean-square error)
3D PSR m 75
MSSR/IFF m 60
Azimuth accuracy (mean-square error)
3D PSR ° 0.15
MSSR/IFF ° 0.1
Height accuracy (mean-square error)
3D PSR m 60